INNOVARROSIGNATURES

Sent Items update (optional)

When the relay adds the signature, it does so after the message has left Outlook, so the copy in the sender's Sent Items has no signature. With Sent Items update switched on, Innovarro Signatures replaces that copy with the signed version a few seconds after sending, so people see exactly what their recipients received.

It is optional and off until you ask for it. It uses a separate application, Innovarro Signatures – Sent Items, that needs permission to change mail in your mailboxes. The main Innovarro Signatures application stays read-only.

Which messages it affects

Only messages the relay signed (result applied in the portal's Recent messages). Typical examples:

  • Mail from the built-in Mail apps on iPhone, iPad, Android and Mac.
  • Inline replies in classic Outlook for Windows, where the Outlook add-in cannot run.
  • Any other mail client without the Outlook add-in.

Messages the Outlook add-in signed already have the signature in Sent Items and are not touched. Messages from scanners and business applications usually have no copy in Sent Items, so there is nothing to update.

What happens to a message

  1. The relay signs the message and hands it back to Exchange Online as usual. Delivery never waits for this feature.
  2. About 15 seconds later the service looks in the sender's Sent Items for the message by its Message-ID. If the copy is not there yet, it looks again after 1, 3 and 10 minutes, then gives up.
  3. It saves the signed version in Sent Items with the original's recipients (including Bcc), subject, attachments, importance, categories and send time, and in the same conversation thread. It is saved as a sent, read message, not a draft.
  4. Only then is the unsigned copy deleted. It goes to the mailbox's Recoverable Items (not Deleted Items), so retention policies, litigation hold and eDiscovery still have it for as long as your policies keep it.

The service opens no other messages and nothing else in the mailbox. While it waits, it holds the signed message in memory only (at most about 15 minutes); nothing is written to disk. The result is shown in the portal (see Check that it works).

Before you start

  • Steps 1 to 3 of the setup are done and the relay signs mail for your organisation.
  • You are a Global Administrator or Privileged Role Administrator in Microsoft 365. Only these roles can grant an application permission to mailboxes.
  • Decide which mailboxes it may work on:
    • All mailboxes (option A): one click, nothing to maintain.
    • Only members of one group (option B): you choose the mailboxes with Exchange Online PowerShell. Use this if your policies do not allow an application to have access to every mailbox.

Do one of the two options, not both. Option A gives access to all mailboxes even if option B is also set up.

Option A: all mailboxes

  1. Sign in to the link below as a Global Administrator (or Privileged Role Administrator):

    Allow Innovarro Signatures to update Sent Items

  2. Microsoft shows the consent screen. Check that:

    • the application is Innovarro Signatures – Sent Items, and
    • the only permission is Read and write mail in all mailboxes (Mail.ReadWrite).

    Then choose Accept.

  3. You return to a page that says Thank you, consent granted.

  4. Ask Innovarro support to switch on Sent Items update. Innovarro checks the access and switches it on, usually within one working day, and lets you know. You do not need to change anything else.

After consent the application is listed in the Microsoft Entra admin center under Enterprise applications as Innovarro Signatures – Sent Items, with application ID 547c212c-d16e-4314-8d7e-bc00bc4db309.

Option B: only members of a group

Exchange Online RBAC for Applications lets the application work on the mailboxes in one group only. You need PowerShell 7 (or Windows PowerShell 5.1) with the Exchange Online and Microsoft Graph modules. Install them once:

Install-Module ExchangeOnlineManagement -Scope CurrentUser
Install-Module Microsoft.Graph.Applications -Scope CurrentUser

Do not use the consent link from option A. If you already did, remove that permission first: Entra admin center → Enterprise applications → Innovarro Signatures – Sent Items → Permissions → on the Mail.ReadWrite row choose ⋯ → Revoke permission.

1. Choose the group

Use a mail-enabled security group or a distribution group in Exchange Online with the people whose Sent Items should be updated as direct members. Members of nested groups are not included. Shared mailboxes that send through the relay must be members too.

2. Add the application to your tenant

Run this as a Global Administrator or Privileged Role Administrator. It adds the application to your tenant without giving it any permission:

Connect-MgGraph -Scopes 'Application.ReadWrite.All'
$sp = Get-MgServicePrincipal -Filter "appId eq '547c212c-d16e-4314-8d7e-bc00bc4db309'"
if (-not $sp) { $sp = New-MgServicePrincipal -AppId '547c212c-d16e-4314-8d7e-bc00bc4db309' }
$sp.Id    # the object ID, needed in the next step

3. Give it access to the group's mailboxes

Run this as an Exchange Administrator in the same PowerShell window. Replace Signature users with the name of your group:

Connect-ExchangeOnline
New-ServicePrincipal -AppId '547c212c-d16e-4314-8d7e-bc00bc4db309' -ObjectId $sp.Id -DisplayName 'Innovarro Signatures - Sent Items'
$group = Get-Recipient -Identity 'Signature users'
New-ManagementScope -Name 'Innovarro Signatures Sent Items' -RecipientRestrictionFilter "MemberOfGroup -eq '$($group.DistinguishedName)'"
New-ManagementRoleAssignment -App '547c212c-d16e-4314-8d7e-bc00bc4db309' -Role 'Application Mail.ReadWrite' -CustomResourceScope 'Innovarro Signatures Sent Items'

4. Test it

Check one mailbox inside the group and one outside it:

Test-ServicePrincipalAuthorization -Identity '547c212c-d16e-4314-8d7e-bc00bc4db309' -Resource 'someone.in.the.group@contoso.com'
Test-ServicePrincipalAuthorization -Identity '547c212c-d16e-4314-8d7e-bc00bc4db309' -Resource 'someone.else@contoso.com'

The first must show InScope: True for Application Mail.ReadWrite, the second InScope: False. Microsoft says changes can take 30 minutes to 2 hours to apply everywhere.

5. Ask Innovarro to switch it on

Tell Innovarro support that you used option B and which group. Innovarro switches Sent Items update on, usually within one working day. People you add to the group later are covered automatically.

Check that it works

  1. Send a message to an external address from a client without the Outlook add-in, for example the Mail app on an iPhone.
  2. Wait about 30 seconds and open Sent Items. The message shows the signature, with the same send time and recipients.
  3. In the portal, open your organisation and look at Recent messages. The message shows applied, with Sent Items: updated under it.
Sent Items result Meaning
updated The signed copy replaced the unsigned one.
already updated It was done before (the message was sent through the relay twice). Nothing to do.
not found There was no copy in the sender's Sent Items after 15 minutes. Normal for apps and devices that do not save sent mail in the mailbox. For a shared mailbox, see Limits.
skipped: mailbox not in directory The From address is not a user or shared mailbox in your Microsoft 365, for example an application sending as an alias.
failed: too large for Sent Items update The message with its attachments is larger than about 3.5 MB. The unsigned copy stays in Sent Items. Recipients received the signed version.
failed: token: … The application is not in your tenant. Do option A, or step 2 of option B.
failed: Graph 403: … The application has no access to this mailbox. Option A: consent was revoked. Option B: the mailbox is not a direct member of the group, or the change has not applied yet.

A failed update never affects delivery: recipients always get the signed message.

Limits

  • Large messages: messages larger than about 3.5 MB including attachments are left unchanged in Sent Items.
  • Shared mailboxes: the service looks in the shared mailbox's own Sent Items. By default Outlook saves mail sent as a shared mailbox in the sender's personal Sent Items instead. To have it in the shared mailbox, run Set-Mailbox -Identity 'shared@contoso.com' -MessageCopyForSentAsEnabled $true -MessageCopyForSendOnBehalfEnabled $true. The copy in the sender's personal Sent Items is then not updated.
  • Outlook in cached mode shows the change once it syncs, normally within a minute.
  • Read receipts and flags that the sender set on the copy in Sent Items after sending are not carried over.

Switching it off or removing access

  • Switch off: ask Innovarro support. Mail keeps getting the signature; only Sent Items is no longer updated.

  • Remove access, option A: Entra admin center → Enterprise applications → Innovarro Signatures – Sent Items → Properties → Delete.

  • Remove access, option B: in Exchange Online PowerShell run:

    Get-ManagementRoleAssignment -RoleAssignee '547c212c-d16e-4314-8d7e-bc00bc4db309' | Remove-ManagementRoleAssignment -Confirm:$false
    Remove-ManagementScope -Identity 'Innovarro Signatures Sent Items' -Confirm:$false
    Remove-ServicePrincipal -Identity '547c212c-d16e-4314-8d7e-bc00bc4db309' -Confirm:$false
    

    Then delete the enterprise application in the Entra admin center as in option A.

If you remove access while the feature is still switched on, messages show failed in Recent messages until Innovarro switches it off. Delivery is not affected.